Magnetic Pick Up MSP6729 Rotate Speed Sensor Sender Ring Gear Teeth 3/8-24UNF-2A With 1 Year Warranty
Regular price
$29.00
inc. VAT
Free express shipping on orders over $99
Safe Payment, Secure Logistics & Worry-free Returns
Offer for new buyer
Buy quality heavy machinery aftermarket parts for OTHER BRAND at KuduParts, Sign up to get $50 coupons before purchasing.Couldn't load pickup availability
Part Name:
Magnetic Pick Up MSP6729 Rotate Speed Sensor Sender Ring Gear Teeth 3/8-24UNF-2A With 1 Year Warranty
Part Number: MSP6729
Description:
Magnetic Pick Up MSP6729 Rotate Speed Sensor Sender Ring Gear Teeth 3/8-24UNF-2A With 1 Year Warranty
Part Number: MSP6729
Description:
- The magnetic speed sensor indicates when ring gear teeth, or other ferrous projections, pass the tip of the sensor.
- Electrical impulses are induced within the coil and sent to the speed control unit. The signal from the magnetic speed Sensor, teeth per second(HZ), is directly proportional to engine speed.
- The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.
- The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.
- A spot face should be present to provide a flat surface on which to anchor the locknut.
- With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut.
- Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications
- The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
- The leads may need shielding if they are longer than 10 ft. (3m), or if external interference is present.
- Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.